Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Burien?
Spring repair in Burien typically costs $180 – $340 for one spring, and most homes need both matched springs replaced together, so a pair usually runs about twice that. That’s for the spring itself; the written estimate you get before any work starts sets the final price. Most spring jobs are done the same day once we’ve confirmed the right spring for your door.
We answer 24/7, and fast dispatch from 7am to 7pm gets a technician out to look at the door so you’re not guessing at a number. Estimates are free.
Key Takeaways
- One torsion or extension spring: typically $180 – $340 in Burien.
- A matched pair, which is what most doors need: about double the single-spring range.
- Springs are high-tension hardware. This is not a job to try on your own.
- We work on the door and opener brands you actually own, so the technician knows your system before arriving.
- Free estimates, and the written quote is the price you pay.
Spring Replacement Cost Breakdown (2026)
Here’s how spring work and the most common add-on jobs stack up for a home in Burien. These are typical estimated ranges for our market, not exact quotes. The written estimate sets the final price.
| Job | Typical estimated range (Burien, 2026) |
|---|---|
| Spring repair – one spring | $180 – $340 |
| Matched spring pair (usually replaced together) | About double the single-spring range |
| Cable repair | $130 – $250 |
| Opener repair | $120 – $320 |
| Opener installation | $250 – $550 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation | $700 – $2,200 |
| General garage door repair | $150 – $600 |
What pushes a spring job toward the top of the range? The spring type and size, whether it’s torsion (the wound bar above the door) or extension (the springs that run along the tracks), and whether anything else wore out alongside it. Springs usually fail near cables and bearings, because they share the same load. If a cable is frayed or a bearing is grinding, fixing the spring alone leaves a weak link. Those extras are what move the total, not the spring itself.
What keeps a job at the low end? A straight spring-for-spring swap on a door in otherwise good shape. Same size, same mount, no surprises underneath. That’s the clean case, and it’s common.
What Affects Spring Replacement Pricing in Burien
- Torsion vs. extension springs. Torsion springs are wound on a bar above the door and carry most of the load on modern doors. Extension springs stretch along the horizontal tracks and show up on older doors. Each takes different tools and setup, and that shapes the labor.
- One spring or a matched pair. Springs are installed in matched sets for balance. When one breaks, the other has taken the same wear. Replacing a pair keeps the door level and avoids a second job a short time later, so a pair costs about twice a single spring.
- Door type and brand. We work on doors from Clopay, Amarr, Wayne Dalton, Raynor and others, plus openers from LiftMaster, Chamberlain, Genie and Craftsman. Brand familiarity means the technician already knows the typical spring setup and failure points for your system.
- Door size and weight. A heavier or oversized door needs a higher-rated spring, and that’s a bigger part of the price than the labor.
- Condition of the surrounding hardware. Frayed cables, worn drums, or a bent track mean extra parts and extra time. Cables in Burien often run $130 – $250 when they need replacing alongside a spring.
- Access and driveway setup. A tight garage with a low ceiling or a door that’s leaning against a wall takes a little longer to work on safely, and that can nudge the labor portion.
Why Burien Homes See Spring Failures
Springs don’t care about the calendar. They care about cycles – every open and close counts. A garage door that gets used four or five times a day wears its springs much faster than one opened once. Many Burien homeowners use the garage as the main way in and out, which means the door takes far more cycles than people expect, and the springs give out sooner than the original lifespan suggests.
The other thing that matters here is moisture. The Puget Sound region runs damp for much of the year, and a garage that stays humid keeps the door’s metal parts working harder. Springs themselves are steel, and repeated wet-dry cycling doesn’t help them. That’s one reason we look at the whole door – cables, drums, bearings, hinges, rollers – whenever we’re in for a spring. It’s the same reason we keep our spring replacement work focused on the hardware that actually carries the load. You’ll get a straight report on what needs attention now and what can wait.
Burien’s housing runs from older mid-century homes near the downtown core to newer builds further out, and the door hardware tends to match the era of the house. Older doors often have extension springs; newer ones lean toward torsion. We handle both, and we’re used to seeing the particular wear patterns each one develops.
How to Save on Spring Replacement
The biggest saver is honest diagnosis. A free estimate tells you whether you need one spring or the pair, whether it’s actually the spring or a cable that let go, and whether the opener is part of the problem. Those are different jobs, and the price reflects that. Call (877) 619-3963 to get that estimate started.
- Fix the pair, not just one. A single replacement on an aged pair tends to come back around quickly. Doing both at once is usually cheaper than two separate visits.
- Take care of cable and bearing wear at the same time. One visit covering the spring and the parts next to it beats paying for two.
- Don’t let a broken spring force a bigger repair. A door run on a broken spring strains the opener and can bend the track. Stopping and calling early protects the rest of the system.
- Ask what’s in the quote. The written estimate spells out parts and labor before anyone starts. No guesswork, no surprise line items.
- Skip the DIY route. More on that below.
Why We Handle Springs Differently
Springs are the most dangerous part of a garage door. They hold enough stored force to lift a door that weighs well over a hundred pounds, and that force doesn’t go away because the spring snapped. Manufacturers and insurers warn against working on them yourself, and they’re right to. The winding and unwinding of a torsion spring requires specific tools and training, and the wrong move can cause serious injury.
That’s why we treat spring work as its own discipline. Our technicians have up to 14 years of experience and are equipped and trained for high-tension hardware. We don’t hand you a tutorial; we handle it and show you what we found so you understand what failed and why. If you’re wondering whether something is a spring or a cable, the safest move is to stop operating the door and have it looked at.
Springs are also where a generalist handyman runs into trouble. A company that does garage doors all day has the tools, the spring inventory knowledge, and the pattern recognition for your door’s brand. That’s the difference between a repair that holds and one that fails again in a few months.
The Brands We Know Cold
We work on door mechanism, opener, and spring repair across the brands most homeowners actually have. On the opener side, that covers everything from legacy Craftsman units to current LiftMaster and Chamberlain smart systems and Genie. On the door side, we’re at home with Clopay, Amarr, Wayne Dalton, and Raynor, plus LiftMaster- and Chamberlain-branded hardware. Spring and mechanism knowledge ties directly to those brands, because each door’s spring setup and failure pattern has its own signature.
When a technician arrives already knowing your system, you spend less time explaining and more time getting back to working order. That’s a real part of what you pay for, and it’s a good reason to check brand coverage before booking any garage door company in Burien.
Repair or Replace? A Quick Guide
If the door panels and structure are sound but the springs have failed, repair is almost always the sensible call. Springs wear out; they’re consumable parts. When the door itself is sagging, dented beyond repair, or so old that parts are hard to find, replacement can make more sense than chasing repairs, and a new door build runs $700 – $2,200 in Burien.
The honest answer depends on the whole door. A free estimate will tell you which side of that line you’re on. Our Burien Garage Door Repair team can talk through both paths.
FAQs – Spring Replacement Cost
How much does a broken garage door spring cost to fix in Burien?
Budget $180 – $340 for one spring, and about double that for a matched pair, since most doors’ springs are replaced together. The written estimate sets the final price, and estimates are free. Call (877) 619-3963 to get yours.
Is it cheaper to repair or replace a garage door spring?
Repair is far cheaper than replacing the door – a spring fix runs $180 – $340 versus $700 – $2,200 for a new door. Replace the door only if the panels or structure are failing. Call (877) 619-3963 for a free estimate that tells you which you need.
Can you come out today?
Same-day service is often possible. Fast dispatch runs from 7am to 7pm, Sunday through Friday, and we answer the phone 24/7. Call (877) 619-3963 to get on the schedule.
Why does a pair cost more than a single spring?
A pair costs about twice the single-spring range ($180 – $340) because both springs are replaced with matched units. Springs are installed as a set to keep the door balanced, and replacing one of an aged pair tends to lead to a second visit soon after. Call (877) 619-3963 for a quote on the pair.
Can I replace the spring myself?
We don’t recommend it. Garage door springs store enough force to seriously injure someone, which is why manufacturers warn against DIY spring work. Have a trained technician handle it. Call (877) 619-3963 and we’ll take a look.
Get a Free Spring Replacement Estimate in Burien
If your door won’t lift, lifted with a bang, or just feels heavy, the spring is the first thing to check. Call us at (877) 619-3963. We answer 24/7, and fast dispatch from 7am to 7pm, Sunday through Friday, gets a technician to your door to confirm the right fix. Estimates are free, and the written quote you get is the price you pay.
Call (877) 619-3963.
Pricing reflects the Burien market as of 2026. Burien Garage Door Repair offers free estimates – call (877) 619-3963.
What Our Customers Say
"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Eric Yang"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Adam Quinn"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Jodi Barrett