Genie Garage Door Service in Burien, WA

Raised-panel steelRaised-panel steel
Carriage houseCarriage house
Modern flushModern flush
Full-view glassFull-view glass
LiftMaster openersLiftMaster openers
Chamberlain openersChamberlain openers
Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

We have financing partners for your new garage door

You get a price before we start. It does not change when the pro arrives.

Get your free estimate

Why Burien Homeowners Choose Genie Garage Door

We provide independent Genie garage door and opener service in Burien, WA. As an independent Genie service provider, we work on Genie screw, chain and belt-drive systems every week without being tied to Genie’s dealer network, so the diagnosis you get is diagnostic, not sales-driven. We’re not authorized by Genie and we say so plainly. If your Genie door is stuck, grinding, or reversing, or you want a new Genie opener on the door you already have, we can help. Call (877) 619-3963 for a free estimate; we answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Call (877) 619-3963

Why Trust Burien Garage Door Repair for Your Genie Garage Door?

Our technicians have up to 14 years of experience, and a good share of that has been spent under the motor head of a Genie opener, listening to what it’s trying to tell us. Genie has been building openers for a long time – old screw-drive heads still hum away in plenty of Burien garages, and new belt and Wi-Fi units sit in the townhomes near the Ambaum Boulevard corridor. We service both ends of that range.

We’re an independent shop, not a Genie dealer. No factory authorization, no dealer-program sales targets. What we bring to a Genie job is familiarity with the quirks of the brand – the Safe-T-Beam photo-eye wiring that shifts at the floor, the screw-drive lube that dries out over the years, the Intellicode pairing that drops after a power event. We fit quality parts that match your Genie equipment, and we treat the service as warranty-safe work with a written price before we start. If you have a Genie in Burien, someone who’s seen the same failure fifty times is a real advantage.

Explore

Styles & brands we work with

  • Raised-panel steel
  • Carriage house
  • Modern flush
  • Full-view glass
  • LiftMaster openers
  • Chamberlain openers

Common Genie Garage Door Problems We Fix in Burien

One of the most useful things we can tell a Genie owner is that the drive type tells you a lot about the symptom. A growl, a sag, or a grinding sound points to a different part depending on whether your Genie is screw, chain or belt driven. Here’s a map of what we typically find in Burien.

  • Stretched or frayed belt (SilentMax belt-drive heads) – Belt-drive Genies run quiet until the belt ages, then the door hesitates, slips before it climbs, or makes a growl under the motor cover. The drive sprocket wears alongside the belt, so both want a look. This one is often mistaken for a motor problem when the motor is fine.
  • Chain sag and stripped trolley (ChainMax and Chain Drive units) – You press the remote, the motor runs, but the door doesn’t travel. The chain has slackened or the trolley carriage has worn and slips. The hum without movement is the giveaway, and the fix is a chain-and-trolley service, not a full opener replacement.
  • Grinding and reversal under load (older screw-drive Genie heads) – Screw-drive Genies still common in Burien’s older ramblers wear their thrust bearing and lose lube over time. You’ll hear a loud grinding, and the opener may reverse mid-travel when the motor senses load. The head may be sound; the screw and its lube are often the whole story.
  • Safe-T-Beam photo-eye failures – Genie’s Safe-T-Beam brackets and wiring sit low and get nudged, corroded or knocked out by debris. A door that reverses or refuses to close often has a misaligned or dirty eye, and the fix is a bracket or wiring service with proper calibration.
  • Intellicode remote pairing loss or a failed logic board – After a power outage or storm, remotes sometimes drop their pairing, and older Genie heads can lose a logic board. Re-pairing is quick; a failed board needs a real diagnosis before you spend on a replacement.
Questions about your garage door?Free estimate, price agreed before work starts
Call (877) 619-3963

Genie Parts & Our Repair-vs-Replace Approach

We fit Genie-compatible OEM-spec belts, chains, trolleys and Safe-T-Beam assemblies, and we’ll go to a quality aftermarket part for a discontinued Genie head when the OEM piece is unavailable or priced out of proportion. We don’t claim to keep a stock of Genie parts; what we offer is the right part for your system, fitted properly.

The repair-or-replace question on a Genie usually comes down to the head. If the screw is the failure on an older screw-drive unit, the honest call is often repair and keep, since the head is sound. If the logic board has failed on an aging opener, replacement is usually the sensible spend. Either way you get a written price before we touch anything. Call (877) 619-3963 for a free estimate on your Genie in Burien.

Our Genie Service Process – Step by Step

  1. 1
    Diagnosis. We test the door balance by hand first, then check the carriage, belt or chain tension, and Safe-T-Beam wiring at the floor. On a Genie, the drive type narrows the fault fast.
  2. 2
    Repair or install. For a repair we fit the compatible belt, chain, trolley or eye assembly. For a new Genie opener we measure the door, headroom and rail needs on your sloping lot before ordering, and schedule the install.
  3. 3
    Test. We cycle the door through full travel, check the auto-reverse and Safe-T-Beam response, re-pair the Intellicode remotes, and confirm the door balances without the opener.
  4. 4
    Written estimate and follow-up. The price is quoted and agreed before any work starts, and we walk you through what was found and what we did.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (877) 619-3963

Genie Products We Service & Install in Burien

We service the full spread of Genie equipment we see around Burien: belt-drive heads like the SilentMax 750 and SilentMax Connect, chain-drive units like the ChainMax 1000 and the Chain Drive 500 and 550, the older 2028 and 2035 screw-drive openers still running in mid-century ramblers, and premium units like the MachForce and StealthDrive Connect. We also handle the doors those openers drive and the accessories around them.

We do opener repair, opener installation and sensor calibration, and we’ll fit a new Genie opener to an existing door when the door itself is worth keeping. This is not a new-door sales pitch. Bring us the Genie you have.

We Also Service These Brands

Genie work is a big part of what we do, but we’re not a single-brand shop. If your garage has a LiftMaster or Chamberlain opener, we work on those too, and brand familiarity means the technician arrives already knowing the typical failure modes of your system. A Genie in Burien and a Chamberlain next door get the same level of attention.

FAQs – Genie Garage Door Service in Burien

Service Typical Estimate
Opener Repair $120 – $320
Opener Installation $250 – $550
Sensor Calibration $120 – $240

These are typical estimates; the written estimate sets the final price, and it’s quoted and agreed before any work starts. Call (877) 619-3963 for an exact quote – estimates are free.

Book Your Genie Service in Burien, WA

Got a Genie that runs but won’t lift, reverses partway, or grinds under the head? We work on Genie screw, chain and belt-drive systems in Burien and we’ll give you a straight answer. Call (877) 619-3963 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Written by the team at Burien Garage Door Repair.

Need Garage Door help nationwide? Licensed & insured · within the hour response · free estimates
Call (877) 619-3963
Local Service Coverage

Request a Free Estimate in Burien

Tell us what you need - Burien Garage Door Repair responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - We Answer 24/7