Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Spring Repair Across Des Moines
If your garage door dropped hard this morning or stalled halfway up, you’re likely dealing with a failed spring. We handle garage door spring repair for homeowners all over Des Moines, from the hillside streets above Marine View Drive down toward Redondo and Saltwater State Park. Springs are the most dangerous part of any garage door to touch, and in this town they fail in ways inland technicians don’t see often. Call (877) 619-3963 for a free estimate. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday.
Why Des Moines Homeowners Call Burien Garage Door Repair for Garage Door Spring Repair
We’re a garage door specialist, not a handyman outfit that also does doors. That single-trade focus is why so many Des Moines homeowners call us: every job we take is a garage door job, and springs are one of the three failures we handle most. Our technicians have up to 14 years of experience, and they know how the salt air off Puget Sound changes the way hardware ages on a Sound-facing door versus one a few blocks uphill.
We work on the brands you actually own, including Chamberlain, Genie, Clopay and Amarr, so a technician arrives already familiar with the typical failure points of your system instead of guessing. We serve Des Moines and the surrounding communities, and we keep our pricing straight: the price is quoted and agreed before any work starts. Our reputation here rests on doing the repair right and explaining what failed, not on selling you a new door.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Spring Repair Services in Des Moines
Torsion Spring Replacement
Most Des Moines doors use a torsion spring mounted on a bar above the door. On hillside homes close to the water, those coils often rust and lose tension well before their rated cycle life is used up. We replace torsion springs in matched pairs, and we use coated or galvanized coils to hold up against marine air. A typical torsion spring repair in Des Moines runs $180 – $340 for one spring; a matched pair costs about twice that.

Extension Spring Replacement
Older ramblers and split-levels around Des Moines often still run extension springs along the tracks. When corroded hinges or rollers start to seize, they put uneven load on these springs and wear them out faster. We swap the springs and check the surrounding hardware so the new pair isn’t fighting a stiff door.

Broken Spring Repair
A snapped spring usually means the door won’t lift or slams down without warning. In Des Moines, spring failures often show rust bloom and cable fraying before they show a clean break, so we inspect the whole assembly when we’re called out, not just the obvious break. We get the door back to working order safely, with new safety cables and a balance check before we leave.

Spring Adjustment
Sometimes the spring hasn’t failed; it’s just out of tension, and the door feels heavy or won’t stay up. Adjusting torsion hardware is high-tension work, so we handle it with the right tools for the job rather than a homeowner’s wrench. If you’re near Marine View Drive or up toward the bluff, we’ll also check whether hillside damp has thrown the door off balance.
Trusted Brands We Service in Des Moines
We work on equipment from eight major manufacturers, including Chamberlain, Genie, Clopay and Amarr. That covers the vast majority of doors and openers in Des Moines homes, from legacy mechanical systems to modern smart-home openers. Brand familiarity means our technicians arrive already knowing how your system tends to fail, which keeps a spring repair moving instead of turning into a diagnosis session. We don’t claim to stock parts locally; we identify what your door needs and bring the right coastal-grade springs and hardware to the job.
See the difference
Before
After
Before
After
Before
AfterCommon Garage Door Spring Repair Problems We See in Des Moines Homes
- Salt-air corrosion on torsion coils and bearing plates. On Sound-facing doors, the marine air pits spring coils and end bearing plates so they snap or lose tension long before their rated cycles are spent. A 1960s rambler a few blocks from the water can show rust bloom and fraying cables before a clean break ever appears.
- Rotted bottom sections and jambs from hillside runoff. Heavy winter rain rolling down Des Moines’ steep lots rots wood bottom sections and jambs on the city’s 1950s – 1970s doors. That shifted weight lands squarely on the springs and throws door balance off.
- Corroded hinges, rollers and cables. Year-round marine damp seizes steel rollers and frays cables on older rambler doors. Seized hardware puts uneven load on extension springs and the opener rail, so the spring wears out fast.
- Original single-car wood doors with low headroom. Many split-levels set their garages into the hillside with sloped openings and original wood doors. That combination complicates spring and opener replacement, and it’s where we see the most mismatched hardware.
Pricing for Garage Door Spring Repair in Des Moines, WA
Spring repair in Des Moines typically runs $180 – $340 for one spring, and a matched pair usually costs about twice that because we replace both together. Here are the typical estimated ranges for the related work that often comes up on an older Des Moines door:
| Service | Typical estimated range |
|---|---|
| Spring Repair (one spring) | $180 – $340 |
| Cable Repair | $130 – $250 |
| Roller Replacement | $110 – $220 |
| Track Realignment | $120 – $240 |
These are estimates, not fixed prices. Corroded tracks, a rotted bottom section or a door that’s lost its balance can add work. We quote the job and agree the price with you before any work starts, and the written estimate sets the final price. The estimate itself is free.
We Also Serve Cities Near Des Moines
Des Moines sits close to a lot of our work, and we also take spring repair calls in SeaTac, Tukwila, Kent and Burien. If you’re just over the line in one of those cities, call and we’ll confirm coverage and get you on the schedule.
Serving Des Moines, WA – Our Local Coverage Area
We serve Des Moines and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Spring Repair in Des Moines
Because Des Moines doors sit on hillside driveways within blocks of Puget Sound, and salt-laden onshore air corrodes spring coils and end bearing plates years sooner than the rain-shadowed inland conditions in Kent or Auburn. The same marine air that pits a 1960s rambler’s galvanized track attacks the torsion springs, so failures here often show rust bloom and cable fraying before a clean break. Call (877) 619-3963 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Often, yes. A door that’s heavy to lift by hand while the opener still turns usually points to a spring that’s lost tension rather than a dead opener. In Des Moines, that’s frequently a corroded torsion coil or a door thrown off balance by rotted bottom sections. Call us and we’ll pinpoint it with a free estimate before anything is replaced.
Both, in almost every case. Torsion springs are matched as a pair, and the second one has usually taken the same rust and cycle wear as the one that broke, so replacing one leaves you set up for a second failure. Pair replacement is why the cost is about twice the single-spring range. Call (877) 619-3963 for an exact quote on a matched pair.
It should look at the full spring assembly, not just the spring: coils for rust bloom, end bearing plates for pitting, cables for fray, drums for corrosion, and door balance. On Sound-facing doors near Redondo and Saltwater State Park, we also check the photo-eye sensors and track alignment, since seized hardware puts uneven load on the springs. Call (877) 619-3963 for a free estimate.
Marine damp and salt air seize steel rollers and fray cables faster on a Sound-facing door than on an inland one. When those parts stiffen, they put uneven load on your extension springs and the opener rail, so the whole system wears out as a unit. Swapping in nylon rollers, stainless fasteners and fresh safety cables at the same time as the springs is what breaks that cycle. Call (877) 619-3963 for a free estimate.
Ready to get your door back to working order? Call (877) 619-3963 for a free estimate on garage door spring repair in Des Moines. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 14 years of experience, the price is agreed before any work starts, and every job we take is a garage door job.
Written by the team at Burien Garage Door Repair.