Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Opener Installation Cost in Burien?
Opener installation in Burien typically costs $250 – $550 for a standard residential job, including removal of the old unit and setup of the new one. A basic chain-drive replacement with a like-for-like unit lands near the bottom of that range, while a belt-drive or smart-home opener with Wi-Fi and battery backup, plus new rail and hardware, pushes toward the top. The written estimate you get before any work starts sets your exact price.
We’re a garage door specialist that handles opener installation on the brands most Burien homes actually have: LiftMaster, Chamberlain, Genie, Craftsman, and the older Raynor units that show up in mid-century Highline-area houses. Our technicians have up to 14 years of experience, and every job is a garage door job. Call (877) 619-3963 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- Typical opener installation in Burien runs $250 – $550, all-in for a standard residential swap.
- Replacing a failed opener is separate from repairing one: opener repair is $120 – $320, and often that’s the better call.
- New-door jobs sometimes run alongside a new opener, but door installation is priced on its own at $700 – $2200.
- The opener has to match your door’s weight and your home’s wiring; mismatches are the most common reason a self-bought unit sits in the box.
- Estimates are free. The price is set per job by the written estimate, not by a phone guess.
Opener Installation Cost Breakdown (2026)
Here’s how a typical Burien opener installation breaks down. These are estimated ranges for the market as a whole; your written estimate confirms the number for your specific door and unit.
| Line item | Typical estimated range |
|---|---|
| Opener installation (standard residential, supply and setup) | $250 – $550 |
| Opener repair (if the unit can be fixed instead of replaced) | $120 – $320 |
| Garage door repair (door-side issues found during install) | $150 – $600 |
| Spring repair (one spring, if tension is off and the new opener strains) | $180 – $340 |
| Cable repair | $130 – $250 |
| Panel replacement | $250 – $500 |
| Track realignment | $120 – $240 |
| Roller replacement | $110 – $220 |
| New door installation (if the old door is past saving) | $700 – $2200 |
What pushes an opener installation toward the top of the $250 – $550 range? A premium smart-home unit with camera, battery backup, and app control costs more than a basic chain-drive. A door that needs new hardware, a rebalanced spring, or fresh rollers adds door-side work on top. And an older home with awkward ceiling framing or a short wiring run takes more time to set up cleanly. The good news: because we do garage doors only, we catch the door-side problems during the same visit rather than sending you back to square one. You’ll see the full picture in the estimate.
For springs specifically, one thing worth knowing: a matched pair is usually replaced together, so a pair costs about twice the single-spring range above. If the old opener died because the door had gotten heavy, that’s usually a spring problem hiding behind the motor.
What Affects Opener Installation Pricing in Burien
- Opener type and brand. A chain-drive Craftsman or Genie replacement sits near the bottom of the range. A belt-drive LiftMaster or Chamberlain with Wi-Fi and battery backup sits higher. The brand you choose drives more of the price than anything else.
- Door weight and balance. The opener has to lift your actual door, not a generic one. A single-car wood door and a double-car insulated door need different units. If the door is out of balance, we’ll flag it before the new opener goes up.
- Existing wiring and outlets. Most Burien garages have a ceiling outlet near the opener, but older homes in the Seahurst and Gregory Heights areas sometimes need an outlet or wiring run added before the unit can be powered. Any electrical work gets handled by a licensed electrician, and we’ll tell you if that’s what you need.
- Ceiling height and framing. Standard eight-foot ceilings are simple. A taller ceiling, a low-clearance situation, or a ceiling that needs blocking adds time.
- Removal and disposal of the old unit. Pulling down an old opener, disconnecting the rail, and hauling it away is part of a normal install. A rusty unit bolted in for decades takes longer.
- Safety features. A new opener with modern safety reverse and photo-eye sensors is standard. If your garage door is older, adding the safety hardware properly is part of doing the job right, not an upsell.
- Smart-home integration. If you want the opener on your phone, that’s a different unit and a slightly longer setup. It’s worth it for a lot of homeowners, but it’s a real cost factor.
One thing that does not change the price: the day of the week. Same-day and next-opening work is scheduled at the standard price. The written estimate sets the final price, and we don’t add a premium for urgency.
Should You Repair or Replace the Opener?
Repair is usually the cheaper call if the door still moves freely and the problem is isolated – a stripped gear, a dead logic board, a worn drive belt, or a remote that won’t pair. Opener repair runs $120 – $320, well below a fresh install. Replacement makes more sense when the unit is old enough that a second failure is likely, or when the motor is undersized for the door and has been straining for years.
Both cases are common. We see plenty of Craftsman units from the 1990s still limping along in Burien homes, and plenty of perfectly good belt-drive units where a $180 repair saves a $450 replacement. Because opener repair is one of our three core services, we can tell you honestly which side you’re on. For the full picture on what a new unit involves from start to finish, see our opener installation page.
If the opener is fine and the problem is the door itself, that’s a separate diagnosis. We handle garage door repair in Burien as a core service, and if the door is binding, off-track, or heavy, that gets sorted before or alongside the opener work.
How to Save on Opener Installation
A few practical things that actually move the number:
- Get a free estimate before you buy a unit. Buying an opener off the shelf and then finding it doesn’t match your door or your wiring is the most expensive mistake we see. Call (877) 619-3963 and we’ll tell you what your door needs.
- Fix door-side issues first. If the door is out of balance, the new opener will work harder than it should and wear out faster. Fixing rollers, springs, or tracks before install saves you a callback later.
- Choose the right drive type. Belt-drive is quieter but costs more than chain-drive. If your garage is under a bedroom, the belt is worth it. If it’s detached, a chain-drive unit does the same job for less.
- Skip features you won’t use. A camera, integrated lighting, and voice control are nice, but if you just want the door to open, a standard smart-capable unit covers it.
- Bundle the door-side work into one visit. When springs, rollers, or tracks need attention, doing it in the same appointment is cheaper than a second call. Free estimates make this easy to plan.
We don’t sell new doors as a first option. The goal is to get your opener back to working order at a fair price, and the estimate reflects that.
What Happens When You Call
You’ll describe the door and the opener, and we’ll ask a few questions to figure out whether a repair or a replacement fits your situation. From there, we schedule a visit to look at the actual unit and the door. The estimate you receive is free, and the written estimate sets the final price. Our technicians have up to 14 years of experience with the brands Burien homes actually have, so they arrive already knowing the typical failure modes of your system.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. If you call outside dispatch hours, a call gets booked into the next opening, Sunday through Friday, 7am to 7pm. We’re closed on Saturday. If a door or opener fails on a Saturday, call and we’ll book you for Sunday.
For everything else we handle in Burien, including springs and the opener problems behind a stuck door, visit the Burien Garage Door Repair home page.
FAQs – Opener Installation Cost
How much does opener installation cost in Burien?
Opener installation in Burien typically costs $250 – $550 for a standard residential job, depending on the unit type, door weight, and any door-side work needed. Call (877) 619-3963 for an exact quote. Estimates are free.
Is it cheaper to repair or replace a garage door opener?
Repair is usually cheaper at $120 – $320, while replacement runs $250 – $550. If the motor, gear, or board is the only problem and the unit is otherwise sound, repair is the right call. Call (877) 619-3963 and we’ll tell you which side you’re on.
Can you come today?
Same-day service is possible for many opener jobs, and we do same-day work at the standard price. Call (877) 619-3963. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Do I need a new opener if my old one stopped working?
Not always. Plenty of dead openers are repairable at $120 – $320. A failed capacitor, a burned-out logic board, or a stripped gear is fixable without replacing the unit. Replacement makes sense when the motor is undersized or the unit has had repeated failures. Call (877) 619-3963 for a free estimate.
Does the price change if my door also needs repair?
Yes, but only by the door-side work itself. Garage door repair runs $150 – $600, spring repair $180 – $340 for one spring, and roller replacement $110 – $220. Bundling it into the same visit is cheaper than scheduling a second call. Call (877) 619-3963 to plan it in one go.
Can you install an opener I bought myself?
Sometimes, but it depends on whether the unit matches your door’s weight and your garage’s wiring. The most expensive mistake we see is an opener bought off the shelf that doesn’t fit the door. Call us first at (877) 619-3963 and we’ll tell you what to buy before you spend the money.
Safety Note on Springs and Electrical Work
Opener installs often reveal door-side problems. Springs, in particular, carry high tension and are the most dangerous part of any garage door system. That’s not a DIY job. Electrical work – adding an outlet or running wiring for the opener – is also not something we take on; it belongs with a licensed electrician. We handle the opener and the door mechanism. The rest gets flagged in the estimate so you know who to call.
If the door is binding or the springs look suspect, we’ll tell you before the new opener goes up. Getting the tension right first saves the motor and the door.
Written by the team at Burien Garage Door Repair.
Pricing reflects the Burien market as of 2026. Burien Garage Door Repair offers free estimates – call (877) 619-3963.
What Our Customers Say
"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."
- Eric Yang"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."
- Adam Quinn"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Jodi Barrett