Panel Replacement Cost in Burien - Typical Price Ranges, Then Your Exact Quote

Typical price ranges for the work, then a free exact quote for your door. No call-out fee to find out where you land, and the price is agreed before work starts.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (877) 619-3963

Call to schedule your free estimate

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Raised-panel steelRaised-panel steel
Carriage houseCarriage house
Modern flushModern flush
Full-view glassFull-view glass
LiftMaster openersLiftMaster openers
Chamberlain openersChamberlain openers
Every visit starts with

Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included

We have financing partners for your new garage door

You get a price before we start. It does not change when the pro arrives.

Get your free estimate
Explore

Styles & brands we work with

  • Raised-panel steel
  • Carriage house
  • Modern flush
  • Full-view glass
  • LiftMaster openers
  • Chamberlain openers
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Questions about your garage door?Free estimate, price agreed before work starts
Call (877) 619-3963

How Much Does Panel Replacement Cost in Burien?

Panel replacement in Burien typically costs $250 to $500 for a single section, and most homes here need just one or two sections rather than a full door. That estimated range covers the panel itself, the labor to fit it, and the small hardware adjustments that usually come with getting a new section seated and running clean. The written estimate we give you after we see the door sets the final price, and getting that estimate costs nothing.

A dented bottom panel, a section bent out of line by a car, or a panel that’s cracked along a seam all fall into that range. It’s often a fraction of what a new door runs, which is why we lead with panel replacement when the rest of the door is still sound. Our technicians have up to 14 years of experience, and we work on the panel and section systems of Clopay, Amarr, Wayne Dalton, Raynor, and other major brands, so we recognize your door before we start.

Panel Replacement Cost Breakdown (2026)

Here’s how the typical estimated ranges break down for panel work and the related repairs that often come up at the same time. Treat these as ballpark figures for the Burien market in 2026; your written estimate is what sets the actual price.

Job Typical Estimated Range
Single panel replacement $250 – $500
Garage door repair (general) $150 – $600
Track realignment $120 – $240
Roller replacement $110 – $220
Cable repair $130 – $250
Spring repair (one spring) $180 – $340
Opener repair $120 – $320

A note on the spring line: that figure is for one spring. Springs are usually replaced as a matched pair, so a pair costs about twice that range. We’ll tell you clearly which situation your door is in.

What pushes panel work toward the top of the $250 – $500 range? A panel that needs custom color-matching or a special order takes more time and carries a higher material cost than a standard section. A section bent badly enough that the surrounding panels or the track got stressed adds realignment or roller work on top. What keeps it lower? A straightforward lower-panel swap on a common brand, where the section is standard stock and the track is still true. Panel damage that’s purely cosmetic and limited to one section sits at the low end; damage that also knocked the door out of alignment sits higher because we’re correcting more than the dent.

What Affects Panel Replacement Pricing in Burien

  • Which panel, and how many. The bottom section takes the most abuse – it’s the one closest to the driveway, the one a bumper or a bike hits. A single bottom panel is the most common job we see, and it’s usually the least expensive. Side sections and top sections cost differently depending on how the door is built.
  • Brand and panel profile. A door built by Wayne Dalton, Clopay, or Raynor may use a proprietary profile, so we match the actual OEM section rather than force-fitting a generic one. Matching the brand and the panel design keeps the door looking and running right, and it’s why we ask for the make before we arrive.
  • Color and finish matching. If your door is a non-standard color or has a textured finish, the replacement section needs to match the rest of the door. Standard colors are the easy case; specialty finishes may need to be ordered, which affects both cost and timing.
  • Whether the door is insulated. An insulated panel is a different, heavier component than a basic steel skin, and that carries a different price. Panels on insulated doors also need to match the insulation and construction of the rest.
  • Hidden damage behind the dent. A panel that looks simply bent can hide a bent track, a worn roller, or stress on the hinge line. When we inspect, we check whether the hit was isolated to the panel or whether it worked its way into the rest of the running gear. That’s the difference between a single line item and two or three.
  • Access and clearances. Burien homes are a mix of older garages and newer builds, and some garages sit tight to the property line or have low clearance. A door that needs a ladder and a tight-side workaround takes more labor than one with room to move.

One local reality worth naming: many Burien garages face the wet side of the year, and pooled water at the garage apron keeps the bottom section damp. Steel panels that hold water against the bottom seal rust along the fold, and that’s the section most often replaced. If your bottom panel is rusting at the seal line, the fix is usually a new section plus a look at the seal itself, not a coat of paint. We’re a garage door specialist and nothing else, so this is the kind of thing we look at every day.

Want to talk it through?Free estimate, price agreed before work starts
Call (877) 619-3963

How to Save on Panel Replacement

The biggest lever on cost is catching the damage while it’s still just panel damage. When a hit dents a section and you leave it, the bent panel can rub the track, chew a roller, or throw the door off balance, and then you’re paying for a panel plus realignment or a roller swap on top. Getting the section replaced early usually keeps you at the low end of the range.

  • Fix the bottom panel first if it’s the rusted one. Rust at the seal line is common in Burien and it spreads. Replacing that section and checking the bottom seal stops the rot from reaching the panels above it.
  • Know your door’s brand. If you can tell us the manufacturer – Clopay, Amarr, Wayne Dalton, Raynor, or another – we can often identify the correct panel profile faster, which trims labor. Look for a label on the inside of the door or the end stile.
  • Group the small stuff. If the door needs a panel and the rollers are shot, handling both in one visit is cheaper than two separate calls, since the door is already apart.
  • Ask whether repair beats replacement. If only one section is damaged and the rest of the door is straight and sound, a panel swap is almost always less than a new door. We’ll tell you honestly when a panel replacement stops making sense. New door installation runs $700 – $2,200, so you’ll know the comparison.
  • Get the estimate in writing. A free written estimate lays out what’s needed and what it costs, so you can decide without pressure. Call (877) 619-3963 to book one.

While we’re on the door, we check the safety reverse and the balance of the whole system. A door that isn’t balanced puts extra load on the opener and the springs, so a small correction now saves a bigger repair later. Learn more about panel replacement and what a section swap involves.

Does Burien Weather Affect Panel and Door Costs?

It can, mostly at the bottom of the door. Burien’s wet stretch of the year keeps the garage apron damp, and water that sits against the bottom seal works its way into the steel fold. That’s why the bottom section is the one we replace most often here, and why a rusty bottom panel is a cost that comes up again and again for local homeowners. Keeping the apron drained and the bottom seal intact is the cheapest defense. Beyond the seal, our wet winters don’t do much to the panels higher up, which is good news: the damage tends to stay low and localized, so it’s usually one section, not the whole door.

Panel Replacement vs. New Door: Which Makes Sense?

If one or two sections are damaged and the rest of the door is straight, a panel replacement is almost always the lower-cost route, since it falls in the $250 – $500 range per section versus $700 – $2,200 for a full new door. A new door starts to make sense when the damage runs through most of the sections, when the door is badly out of line, or when the panels are so worn or rusted that patching one won’t hold. We’re honest about the break-even point: when the repair cost climbs toward the price of a door that’s already at the end of its life, we’ll say so and walk you through both numbers.

Need a price for your garage door?Free estimate, price agreed before work starts
Call (877) 619-3963

What Happens When You Call

When you call, we ask for the door’s brand, roughly how old the door is, and what happened – a car hit, a wind event, rust, or something else. From that we can usually tell whether it’s a single-panel job or something bigger. We then set up a visit, look at the door in person, and write up the estimate. The estimate is free and the price is set per job by that written estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

If the call is for a door that’s stuck or jammed, we’ll talk through what’s safe to check and what isn’t. Panels themselves aren’t the dangerous part of the door – the springs and cables are – and you shouldn’t touch those. We handle that hardware with the proper equipment.

Why Choose a Garage Door Specialist for Panel Work

Panel replacement looks simple from the outside and isn’t. A new section has to match the profile, seat into the hinges and track, and leave the door balanced so it doesn’t strain the opener. We do garage doors only – door repair, opener repair, and spring repair – so every job we take is this job. We work on eight of the most common residential brands: LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor. That brand familiarity matters, because different doors fail in different ways, and we arrive already knowing how yours is built. Whether you have a legacy mechanical opener or a newer smart-home system, the repair side gets the same attention.

You can see the full range of what we do on our Burien Garage Door Repair home page, and if your problem turns out to be the opener rather than the door, we handle that too.

FAQs – Panel Replacement Cost

How much does panel replacement cost in Burien?

Panel replacement in Burien typically costs $250 to $500 for one section, including the panel and the labor to fit it. The written estimate sets the final price, and it’s free to get one. Call (877) 619-3963 for an exact quote.

Can a single panel be replaced, or do I need a whole new door?

Yes, a single panel can usually be replaced. As long as the rest of the door is straight and the track is true, one damaged section is a repair, not a replacement, and it stays near the $250 – $500 range. A new door ($700 – $2,200) only makes sense when the damage is widespread. Call (877) 619-3963 and we’ll tell you which side of that line your door is on.

Why is my bottom panel the one that keeps rusting?

Because it sits closest to the wet garage apron, and Burien’s damp stretches of the year let water collect against the bottom seal. That moisture gets into the steel fold and starts the rust. Replacing that one section and checking the seal is the usual fix. Call (877) 619-3963 to book an estimate.

Does the cost go up if my panel needs a custom color match?

It can. A standard-color panel on a common brand sits toward the low end of the $250 – $500 range, while a specialty color or textured finish may need to be ordered and costs more. The written estimate will show the difference before you commit. Call (877) 619-3963 for a free quote.

Will a panel replacement fix a door that’s running rough?

Only partly. A section swap fixes the dent, but if the door also needs realignment ($120 – $240) or new rollers ($110 – $220) because the damage spread into the track, that’s a separate line item. We’ll identify it during the estimate so there are no surprises. Call (877) 619-3963 to get it looked at.

Get a Free Panel Replacement Estimate in Burien

If your garage door has a dented, cracked, or rusted panel, we can tell you what it takes to get the door back to working order. The estimate is free, and the price is set per job by the written estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Call (877) 619-3963 for a free estimate. Tell us the door’s brand and what happened, and we’ll take it from there.

Pricing reflects the Burien market as of 2026. Burien Garage Door Repair offers free estimates – call (877) 619-3963.

Written by the team at Burien Garage Door Repair.

What Our Customers Say

★★★★★ 4.9 from 7+ reviews

"Logic board on a 15 year old opener. He was upfront that a new opener would cost less than the board plus labor, and he wasn't wrong. No pressure either way."

- Eric Yang

"Replaced the bottom panel after I backed into it. Color match is close enough that you have to know to look for it."

- Adam Quinn

"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."

- Jodi Barrett
Need Garage Door help in Burien? Licensed & insured · within the hour response · free estimates
Call (877) 619-3963

Request a Free Estimate

Tell us what's going on in Burien. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7